P1825 — Pressure control valve 3 / N217 — short to plus
Reference detail for fault code P1825 on the DQ250 DSG transmission family.
What P1825 indicates
The DQ250 transmission control unit stores P1825 when it detects the following condition: Pressure control valve 3 / N217 — short to plus. The fault is electrical: the control unit monitors the current and resistance of each solenoid and pressure control valve, and stores the code when it detects an open circuit, a short circuit or a control current outside the expected range. A stored code does not by itself prove that a part has failed. Before replacing anything, check the live data, wiring, connectors, power supply and fluid condition, and confirm the fault on the vehicle.
Symptoms
- Harsh or missing gear changes
- Some gears unavailable
- Emergency mode, often with only certain gears
- Transmission warning light
Possible causes
- Faulty solenoid or pressure control valve coil
- Damaged internal wiring or connector in the mechatronic unit
- Fault in the valve driver stage of the control electronics
- Contaminated transmission fluid affecting valve operation
Related components
Solenoid / pressure control valve · Mechatronic valve body · Transmission control unit (TCU)
| Fault code | P1825 |
|---|---|
| Transmission | DQ250 (6-speed wet DSG) |
| Factory code | 02E |
| Category | Valve / solenoid electrical |
| Status | Documented — review advised |
This code is documented but not independently confirmed. Confirm it against the specific vehicle before ordering any part.
Have this code on your vehicle?
Send us the code and the vehicle details and we will confirm the correct unit or part by email.
Related pages for the DQ250
DQ250 repair
Symptoms, mechatronic issues and what repair involves for this family.
DQ250 mechatronics
Replacement mechatronic unit and exchange options for this family.
DQ250 parts
Selected parts most often involved in repair for this family.
DQ250 fault codes
Every documented code for this family in one table.
Have a fault code to check?
Send us the code and the vehicle details and we will confirm the correct unit or part by email.